Pro Audio Speakers

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX1-1445 is typical of Celestion's expertise in the field, it features a one piece PETP diaphragm and surround which features a very smooth frequency response especially above 15KHz.  This driver is suggested for use in 3 way systems or in 2 way designs with 12" or smaller woofers.

General Specifications
Type                      1" throat thread on mounting
Magnet Type         Ferrite
Voice coil dia.        1.4", 35mm
Crossover point     above 2,200Hz
Power handling     40 Watts
Sensitivity              106dB
Frequency range   1,500-20.000 Hz
Weight                    2.2lb, 1Kg

More Info

Allow 2-3 weeks for delivery

Genuine Celestion replacement diaphragm assembly

The Celestion TF1525e is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with fibreglass former for increased power handling.
450W EIA power handling

General specifications
Nominal Diameter           15", 381mm
Magnet Type                   Ferrite
Magnet weight                1.4Kg
Voice coil dia.                  2.5", 64mm
Power handling               300W AES, 600W continuous, 1,200W peak
Sensitivity                        97dB
Frequency range             45-3,500Hz
XMAX                              3.5mm
Qts                                  0.4       

More Info 

allow 2-3 weeks for delivery

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX1-1445 is typical of Celestion's expertise in the field, it features a one piece PETP diaphragm and surround which features a very smooth frequency response especially above 15KHz.  This driver is suggested for use in 3 way systems or in 2 way designs with 12" or smaller woofers.

General Specifications
Type                      1" throat bolt on mounting
Magnet Type         Ferrite
Voice coil dia.        1.4", 35mm
Crossover point     above 2,200Hz
Power handling     40 Watts
Sensitivity              106dB
Frequency range   1,500-20.000 Hz
Weight                    2.2lb, 1Kg

More Info

Allow 2-3 weeks for delivery

The AN3510 is a compact full range loudspeaker ideally suited to use in column line array systems.  They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone and a half roll elastomer surround.

General specifications
Nominal daimeter     3.5"/88mm
Power rating             35 W RMS, 70 W continuous
Impedance                8 Ohm
Sensitivity                  87dB
Frequency range       80-19,000 Hz
XMAX                        1.25mm
Qts                             0.67  

More Info

Celestion's FTX series common motor coaxials offer significant advantages over conventional 2 way designs as well as over other coaxial drivers whilst retaining the improved off axis response expected in a coaxial system.

Some coaxial systems mount a seperate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone.  Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system.  Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
The FTX1225 is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Demodulation rings reduce distortion whilst increasing bandwidth and power handling.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
"Sound Castle" clamping of the HF diaphragm decreases distortion and improves reliability.
Edge wound voice coils on both the LF and HF components.

General Specifications
Nominal Diameter               12", 305mm
Magnet assembly                Ferrite
LF Cone material                 Kevlar loaded paper                   HF Diaphragm material   Polyimide
LF Voice Coil Diam              2.5", 64mm                                 HF Voice Coil diameter    1.75", 45mm
LF Power Handling              300W AES - 600W continuous   HF Power Handlimg        60E AES - 120W continuous
LF Sensitivity                        97dB
Frequency Range                50-20,000 Hz
XMAX                                  4 mm
Qts                                       0.382

More Info

NB  SEPERATE CROSSOVER REQUIRED

 

Genuine Celestion replacement diaphragm assembly for the HF50 tweeter.

The SP11906 allows the use of 1" bolt on type compression drivers with standard 35mm threaded mount horns.  Sold in pairs.

 

The Celestion K12H200TC is a 12 inch dual cone bass/mid driver with extended HF response ideally suited for small PA or stage monitor applications.  It van be used alone or with a suitable tweeter or compression driver and horn.  It offers the following features:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.

General specifications
Nominal Diameter           12", 305mm
Magnet Type                   Ferrite
Magnet weight                1.4Kg
Voice coil dia.                  2", 50mm
Power handling               300W EIA, 400W continuous, 800W peak
Sensitivity                        98dB
Frequency range             50-10,000Hz
XMAX                              25mm
Qts                                  0.481       

More Info

allow 2-3 weeks for delivery 

The Celestion TF0818MR is a dedicated mid range driver for use in large, high power, 3 way systems.  It has the following highlights:
High effeciency and power handling.
A closed back chassis which simplifies system design as the mid range does not need a seperate enclosure.
A high temperature copper voice coil with polyamide former for increased power handling.
150W EIA power handling

General specifications
Nominal Diameter           8", 203mm
Magnet Type                   Ferrite
Magnet weight                .57Kg
Voice coil dia.                  1.75", 45mm
Power handling               100W AES, 200W continuous, 400W peak
Sensitivity                        99dB
Frequency range             800-5,000Hz
Fs                                    450Hz
Weight                              1.9Kg       

More Info

Allow 2-3 weeks for delivery 

The H1-7050 is an exponential horn with a 1 inch throat manufactured from cast aluminium and features elastomer damping panels to prevent ringing.  The square chassis allows for mounting horizontally or vertically depending on the dispersion design requrement.

General Specifications

Dispertion         70 x 50 degrees
Weight               0.7 Kg
Cut off               1.5KHz

More Info

The H1SC-8050 is an exponential horn with a 1 inch throat compatible with screw on drivers.  It is manufactured from ABS with a square chassis allows for mounting horizontally or vertically depending on the dispersion design requrement.

General Specifications

Dispertion         80 x 50 degrees
Weight               0.2 Kg
Cut off               1.5KHz

More Info

allow 2-3 weeks for delivery

Genuine Celestion replacement diaphragm assembly

Genuine Celestion replacement diaphragm assembly

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX1-1747 is typical of Celestion's expertise in the field, it features a one piece Polyamide diaphragm and surround with "sound castle" clamping providing reduced distortion and greater reliability.  This driver is suggested as a replacement unit or for use in 2 way and 3 way designs with 12" or 15"  woofers such as the Celestion TF series.

General Specifications
Type                      1" throat bolt on mounting
Magnet Type         Ferrite
Voice coil dia.        1.75", 44mm
Crossover point     above 2,000Hz
Power handling     120 Watts
Sensitivity              110dB
Frequency range   1,000-20.000 Hz
Weight                    5.1lb, 2.3Kg

More Info

Allow 2-3 weeks for delivery

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX20-3020 is a large format 2" throat driver that is typical of Celestion's expertise in this field, it features a one piece Titanium diaphragm and surround with "sound castle" clamping providing reduced distortion and greater reliability.  This driver is suggested for use in high power 2 way designs with 15"  woofers.

General Specifications
Type                      2" throat bolt on mounting
Magnet Type         Ferrite
Voice coil dia.        3", 75mm
Crossover point     above 800Hz
Power handling     200 Watts
Sensitivity              107dB
Frequency range   500-18.000 Hz
Weight                    10.8lb, 4.9Kg

More Info

Allow 2-3 weeks for delivery

Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.

The CF1840JD is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.

General Specifications
Nominal Diameter               18", 457mm
Magnet assembly                Ferrite, 3.81Kg
Cone material                      Kevlar loaded paper
Voice Coil Diam                   4", 100mm
Power Handling                   1,200W AES - 2,400W continuous - 4,800W peak
Sensitivity                            98dB
Frequency Range                30-2,500 Hz
XMAX                                  10 mm
Qts                                       0.397

More Info

The Celestion FTR18-4080HDX is an 18 inch high quality sub bass woofer ideally suited to large ported enclosures.  It offers extremely low frequency performance with high power handling and features the following design highlights:

A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased power handling.
1,000KW EIA power handling

General specifications
Nominal Diameter           18", 457mm
Magnet Type                   Ferrite
Magnet weight                3.1Kg
Voice coil dia.                  4", 100mm
Power handling               800W AES, 1,600W continuous, 3,200W peak
Sensitivity                        96dB
Frequency range             30-1,000Hz
XMAX                              6mm
Qts                                  0.413      

More Info

The Celestion FTR15-3070E is a 15 inch high quality woofer ideally suited to three way system designs or two way designs with a large format compression driver.  It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with fibreglass former for increased power handling.
550W EIA power handling

General specifications
Nominal Diameter           15", 381mm
Magnet Type                   Ferrite
Magnet weight                2.3Kg
Voice coil dia.                  3", 75mm
Power handling               400W AEC, 800W continuous, 1,600W peak
Sensitivity                        97dB
Frequency range             40-4,000Hz
XMAX                              5.5mm
Qts                                  0.40      

More Info

The Celestion TF1225e is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with polyamide former for increased power handling.
450W EIA power handling

General specifications
Nominal Diameter           12", 305mm
Magnet Type                   Ferrite
Magnet weight                1.4Kg
Voice coil dia.                  2.5", 64mm
Power handling               300W AES, 600W continuous, 1,200W peak
Sensitivity                        97dB
Frequency range             50-3,000Hz
XMAX                              3.5mm
Qts                                  0.4       

More Info

allow 2-3 weeks for delivery 

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX14-3020 is a large format 1.4" throat driver that is typical of Celestion's expertise in this field, it features a one piece Titanium diaphragm and surround with "sound castle" clamping providing reduced distortion and greater reliability.  This driver is suggested for use in high power 2 way designs with 12 or 15"  woofers.

General Specifications
Type                      1.4" throat bolt on mounting
Magnet Type         Ferrite
Voice coil dia.        3", 75mm
Crossover point     above 1,000Hz
Power handling     150 Watts
Sensitivity              106.5dB
Frequency range   500-18.000 Hz
Weight                    10.7lb, 4.9Kg

More Info

Allow 2-3 weeks for delivery.

The Celestion TF1230e is a 12 inch general purpose bass driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with polyimide former for increased power handling.
500W EIA power handling

General specifications
Nominal Diameter           12", 305mm
Magnet Type                   Ferrite
Magnet weight                1.4Kg
Voice coil dia.                  35", 75mm
Power handling               350W AES, 700W continuous, 1,400W peak
Sensitivity                        94dB
Frequency range             45-3,000Hz
XMAX                              5mm
Qts                                  0.490       

More Info

allow 2-3 weeks for delivery

The Celestion TF0818 is an 8 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with polyamide former for increased power handling.
150W EIA power handling

General specifications
Nominal Diameter           8", 203mm
Magnet Type                   Ferrite
Magnet weight                0.88Kg
Voice coil dia.                  1.75", 45mm
Power handling               100W AES, 200W continuous, 400W peak
Sensitivity                        94dB
Frequency range             70-6,000Hz
XMAX                              3.5mm
Qts                                  0.429       

More Info 

Allow 2-3 weeks for delivery

The Celestion FTR15-4080HDX is a 15 inch high quality sub bass woofer ideally suited to compact ported enclosures.  It offers extremely low frequency performance with high power handling and features the following design highlights:

A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased power handling.
1.5KW EIA power handling

General specifications
Nominal Diameter           15", 381mm
Magnet Type                   Ferrite
Magnet weight                3.1Kg
Voice coil dia.                  4", 100mm
Power handling               1000W AES, 2,000W continuous, 4,000W peak
Sensitivity                        96dB
Frequency range             40-2,500Hz
XMAX                              8mm
Qts                                  0.33      

More Info

The Celestion FTR18-4080HDX is an 18 inch high quality sub bass woofer ideally suited to large ported enclosures.  It offers extremely low frequency performance with high power handling and features the following design highlights:

A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased power handling.
1.5KW EIA power handling

General specifications
Nominal Diameter           18", 457mm
Magnet Type                   Ferrite
Magnet weight                3.1Kg
Voice coil dia.                  4", 100mm
Power handling               1000W AES, 2,000W continuous, 4,000W peak
Sensitivity                        96dB
Frequency range             30-2,500Hz
XMAX                              8mm
Qts                                  0.42      

More Info

The Celestion FTR15-3070C is a 15 inch high quality, high efficiency bass/mid driver ideally suited to two way system designs.  It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with fibreglass former for increased power handling.
550W EIA power handling

General specifications
Nominal Diameter           15", 381mm
Magnet Type                   Ferrite
Magnet weight                2.3Kg
Voice coil dia.                  3", 75mm
Power handling               400W AES, 800W continuous, 1,600W peak
Sensitivity                        99dB
Frequency range             40-4,000Hz
XMAX                              3mm
Qts                                  0.36      

More Info

The Celestion TF0615MR is a dedicated mid range driver for use in large, 3 way systems.  It has the following highlights:
High effeciency and power handling.
A closed back chassis which simplifies system design as the mid range does not need a seperate enclosure.
A high temperature copper voice coil with polyamide former for increased power handling.
75W EIA power handling

General specifications
Nominal Diameter           6", 152mm
Magnet Type                   Ferrite
Magnet weight                .48Kg
Voice coil dia.                  1.5", 38mm
Power handling               50W AES, 100W continuous, 300W peak
Sensitivity                        97dB
Frequency range             500-5,000Hz
Fs                                    500Hz
Weight                              1.4Kg       

More Info

Allow 2-3 weeks for delivery 

The Celestion FTR12-4080HDX is a 12 inch high quality subwoofer with above average effeciency and power handling and is ideally suited to reflex/ported enclosures.  It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Double suspension for improved linearity at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased power handling.
1.5KW EIA power handling

General specifications
Nominal Diameter           12", 305mm
Magnet Type                   Ferrite
Magnet weight                3.1Kg
Voice coil dia.                  4", 100mm
Power handling               1.000W AES, 2,000W continuous, 4,000W peak
Sensitivity                        93dB
Frequency range             47-3,000Hz
XMAX                              8mm
Qts                                  0.372      

More Info

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX1-1748 is typical of Celestion's expertise in the field, it features a one piece Polyamide diaphragm and surround with "sound castle" clamping providing reduced distortion and greater reliability.  This driver is suggested as a replacement unit or for use in 2 way and 3 way designs with 12" or 15"  woofers such as the Celestion TF series.

General Specifications
Type                      1" throat threaded mounting
Magnet Type         Ferrite
Voice coil dia.        1.75", 44mm
Crossover point     above 2,000Hz
Power handling     120 Watts
Sensitivity              110dB
Frequency range   1,000-20.000 Hz
Weight                    5.1lb, 2.3Kg

More Info

Celestion have built a reputation for some of the best compression drivers available today with more that 1,00 units sold every day.  The CDX1-1425 is typical of Celestion's expertise in the field, it features an aluminium diaphragm with Elastomer surround, induction control and a Neodymium magnet,  The end result is extremely smooth frequency response with exceptional efficiency in a lightweight, compact form factor.  This driver is suggested for use in compact 2 way designs, 3 way systems and particularly in line array systems.

General Specifications
Type                      1" throat bolt on mounting
Magnet Type         Neodymium
Voice coil dia.        1.4", 35mm
Crossover point     above 2,500Hz
Power handling     50 Watts
Sensitivity              108dB
Frequency range   2,000-20.000 Hz
Weight                   0.9lb, 0.39Kg

More Info

Allow 2-3 weeks for delivery